Wall Panels
Flood manufacture solid precast concrete walls up to 200mm thick. The Flood Wall solid panel extends the flood flooring philosophy of mass-producing a product on a long line system.
200mm solid Wall
Mainly used in residential developments to form the party walls and load bearing walls. Window and door opes can easily be formed in the panels which allow the panel to be used as elevation walls
The "Flood 200" panel is produced in standard widths of 2.4m. Due to the modular concept of the wall system, it can be mass-produced on steel moulds. This results in a high quality surface to the panels. Therefore a decorative finish such as Alltek can be applied to the walls, eliminating the need to slab and skim walls. Units are stored on flat and transported on standard flat-bodied trailers and erected on site with a tower or mobile crane.
All of the above contribute to our commitment to meet the construction programme of the project and provide a very cost effective system when compared with other methods of construction.
100mm-150mm Solid wall
Commonly used in industrial and commercial units to construct the elevation walls and party walls.
These panels are manufactured in heights up to 2.4m. The profile of the panel is designed to allow each panel to interlock with another. This allows for stacking the panels on top of each other to provide the party walls. The panels are permanently fixed in place by an angle detail bolted to the steel columns.
Design of wall panels
Flood flooring has an experienced in house design team. Therefore we can design, manufacture and deliver the complete structure to our clients.
All panels are designed in accordance with BS 8110 and current building regulations governing sound and fire proofing properties.
Advantages of using Flood wall system.
- Reduction in construction programme.
- Reduction in site supervision and scaffolding.
- Design and manufacture result in short lead in time to delivery.
- Units are stored on flat reducing site storage areas and expensive storage frames.
- Units are transported on standard trailers.
- Up to 400 sq.m per day can be erected on site.
- Panels are formed on steel beds providing a high quality surface.
- Conduit and socket boxes can be cast into the units.
- No on site pouring of concrete like the twin wall system.
- All dowels and joints are filled with a non-shrink grout.
- Factory produced system resulting in reduced site down time.
